Product Categories

Contact Us

Add:B-406 No.11 Xiyuan Ba Rd, Hangzhou, China

Tel:+86-571-89003971

Fax:+86-571-89001669

E-mail: export@bridgehead.cn

Thermal CTP Plate

Processless Thermal CTP Plate

Processless Thermal CTP Plate

Processless Thermal CTP Plate Processless thermal CTP plate is a new green printing product developed by our factory suitable for thermal CTP platemakers. There is no need any processingn steps before mounting exposed plates on press. Processless Thermal Plate Technical

Product Details

Processless Thermal CTP Plate

Processless thermal CTP  plate is a new green printing product developed by our factory suitable for thermal CTP platemakers. There is no need any processingn steps before mounting exposed plates on press.

Processless Thermal CTP Plate.png

Processless Thermal Plate Technical 

Model

Processless CTP plate

Developer

Not Required

Protection Gum

It's recommended to use FUJI FN-6 or GU-7 protection gum

Chemicals for

Printing Related

Same requirement as for thermal CTP  plate

Sensitivity

≥ 140mj/cm2

The period of latent

image stablization

≤ 7days

Resolution

200 lpi(1-99%), can be suitable for FM

The paper of start-up

< 50sheets

Thickness

0.15/0.30/0.40mm

Dimension

It can be cut according to user requirements

Run length

100,000 impressions

( actual run length depends on printing conditions)

Operation

Conditionfor plate making: the parameter should be set up by 

professionals according to customers's specific conditions and 

consult to related technical manuals as well.

Printing condition: First run water roller 30 to 60 seconds, and

then close the ink roller to run for 20-30 seconds and finally

start paper printing.

Precautions

Avoid aqueous solution such as saliva, water stain, water mist

onto the layout in process of taking plates and plate-making.

Plate should be handled carefully, right parameters should be

set up for plate making.

It's strictly prohibited to operate and transport CTP plate

violently.

 

Storage

Shelf life: 12 months

Plates should be placed in a conditioned room dry and cool, the

temperature should not be higher than 20°c-24°c and RH 

between 40%-50%.

Coated surface can be exposed four hours under fluorescent light

, but should avoid direct exposure to natural light.

Plates should be used up as quickly as possible after opening.

They should be put back in the package and take measures to 

avoid wet and light if they need short-term storage.

 

 


If the processless thermal ctp plate caters to your requirement, welcome to buy the quality and reliable products for sale with us. We are one of the leading offset printing plate manufacturers and suppliers in China. The good after-sale service and competitive price are available.
Hot Tags: processless thermal ctp plate, China, manufacturers, suppliers, price, for sale
Related Products
Feedback