Add:B-406 No.11 Xiyuan Ba Rd, Hangzhou, China
PS plate of the drying process can be simply illustrated as three basic links, namely exposure - development - glue.
Exposure will be coated with a photosensitive layer of the PS version placed in the Shaiban Ji workstations, put the film, through the main light, light two exposure to the film on the PS version of the pattern shows the basic "image"
The PS version of the exposure is about to be exposed in the development tank, so that the developer and full with the wet, about 1 minute or so after the wash plate placed in the water wash the screen was dissolved out of the coating, which shows the "image" The
After the development of the PS version of the image part of the image and non-image graphic part should be applied to a layer of gum arabic in order to prevent the printing plate in the printing process dirty and plate scratch
In the actual operation process, we need to pay attention to the basic operation of the process and the impact of copy quality of the various factors, the plate in the Indian iron in the status and role of the same can not be ignored, because: not a qualified standard version, and then Exquisite patterns will not show up.
Add:B-406 NO.11 XIYUAN BA RD. HANGZHOU,CHINA
Next: PS plate
Related Industry Knowledge
- Acrylic processing need to pay atte...
- The reasons for the pressure-afterb...
- What are the characteristics of the...
- Acrylic sheet During the use of wha...
- What are the recommendations for PM...
- Acrylic sheet is also important in ...
- Types of CTP
- Heat-sensitive CTP plate
- Optical polymerization Type CTP plate
- Kodak XD
- Factors affecting imaging quality o...
- What is the CTP plate ?
- Photopolymerization type CTP plate
- Heat sensitive CTP plate
- Free treatment of CTP plates
- Silver type CTP plate
- Three Differences of CTcP and CTP
- The current advantages of CTcP tech...
- The shortcomings of CTcP technology
- What is CTCP plate?